Autore Topic: BiNGo: OS 4.1 su WinUAE PPC  (Letto 10268 volte)

Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #15 il: 08 Dicembre 2014, 21:54:16 »
WinUAE 29.2 Beta 19


- Restartarting and loading another config crashed if PPC or RTG without JIT direct was active.
- After restarting non-JIT config, JIT direct was not available (old restriction that should have been gone few official releases ago)
- Added A2620/A2630 emulation and two rom images to rom scanner. (390282-06/390283-06 and 390282-07/390283-07) Not JIT direct compatible. 68000 fall back mode causes HALT4 status. ROM special feature: right mouse button at boot = enter boot menu, in boot menu shift+m and right mouse button: enter rom monitor.
- A590/A2091 word writes to DMAC WD SCSI byte registers and Z2 autoconfig registers supported. A2630 boot rom likes to do word writes to byte-size registers.
- PicassoIV AGA flifi bit was set even when using non-AGA hardware. No functional changes.
- Fixed RTG hardware emulation crash in some situations when switching (fullscreen) modes.

No changes to PPC emulation, which is also now considered complete (at least from my point of view), possible existing problems need to be debugged by someone else.


Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #16 il: 08 Dicembre 2014, 21:54:42 »
WinUAE 29.2 Beta 21


- Moved CDTV-CR under original CDTV Quickstart option.
- Added 3.44 CDTV-CR extended ROM.
- CDTV-CR now boots CDTV CDs. CD audio player does not yet work and some games that play CD audio will hang. Also CD reading speed is currently unlimited.
- Added 256M (max possible) Blizzard accelerator board RAM size support. Works with 1230, 1260 and PPC.
- CSPPC P5_SELF_RESET bit emulation fixed, M68K can only reset PPC and PPC can only reset M68K if P5_SELF_RESET is not active. (Blizkick reset hang)
- When switching quickstart modes, extended ROM was not reset if new mode didn't use extended ROM.
- Switching Quickstart models now remembers previously selected model configuration setting.
- Disable tablet mode if tablet name query returns error or empty name. WTInfo() with null parameters is supposed to return error if tablet is not connected but it does not seem to be true with all drivers. (Fixes division by zero guru at boot if tablet emulation is enabled)
- default_xlate() system halt didn't work, broke probably when 1 second boot delay option was added.
- default_xlate() now also generates bus error if Gary bus error bit is set instead of halting.
- Include approximate exception startup time in non-cycle exact 68000 emulation modes.

Un bel VideoTube che mostra la velocitÓ di OS4.1 con WinUAE PPC su Windows
« Ultima modifica: 08 Dicembre 2014, 21:56:38 da Carlo »


Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #17 il: 08 Dicembre 2014, 21:56:16 »
WinUAE 29.2 Beta 22

- CDTV-CR CD unit was initialized even when CDTV-CR emulation was not enabled. Broke CD access on configurations that used CD unit for other purposes.
- Changed directory filesystem max file size limit (when not using 64-bit dos packets) to 4G-1. Old 2G-1 was technically official max size but most native filesystems don't enforce it and support file sizes up to 4G-1 (at least as long as application uses unsigned integers)
- Funzione del settore di leggere CD standard non ha gestito (usato raramente) 2336 settori CD byte correctly.
- Some statefiles have corrupt "extra_cycle" value (probably saved by some buggy beta) that causes long delay when restored, added workaround.
- 68000 CE mode IPL line sampling timing update. Do it during any memory access, not just prefetches.

Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #18 il: 08 Dicembre 2014, 21:57:21 »
WinUAE 29.2 Beta 23


- Dragging vhd file to harddrives panel now adds it as a HDF, not a directory if it does not contain any known filesystem or RDB identifiers.
- PCMCIA IDE was always mounted without drive since drive attribute update long time ago.
- PCMCIA IDE and SRAM can be added (card inserted) after emulation has been started.
- Replaced "JIT direct compatible" option in memory panel with more useful Z3 mapping option: Auto = Use OS mapping if possible, fall back to UAE hack if JIT direct enabled and not enough adddress space. UAE = Always use UAE hack mapping (0x10000000). NOTE: not compatible with non-m68k operating systems. This mode was always forced until 282b1. Real = Always use OS mapping (0x40000000 with alignment support), disable JIT direct if not enough address space.
- Fixed missing graphics in Disposable Hero title screen in non-cycle exact modes.
- Load config with statefile set, load another config without statefile, GUI shows no statefile selected but when starting emulation statefile was still loaded.
- CDTV-CR CD read speed is now limited to 1x/2x.
- Added CD turbo data read speed mode, affects CDTV/CDTV-CR/CD32 emulation only. SCSI CD is always in turbo mode. Checkbox in CD/Harddrives panel.
- QEMU PPC module update, now all extra dependencies are statically linked. External dlls are not needed anymore (whole plugins\qemu can be deleted). Must be located at <winuae path>\plugins\qemu-uae.dll



Piccolo Fix per chi usa la Wazp3D e Warp3D.library


Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #19 il: 08 Dicembre 2014, 21:59:45 »
Nuovo aggiornamento ...  oohooooo ohooooo ohoooo !!!


WinUAE 29.2 Beta 24


- Native code Z3 offset was wrong if Z3 mapping was using "real" mode.
- CD32 NVRAM file was not automatically created (b14).
- Added some accelerator board A1200 and A4000 configs to Quickstart.
- Only PCM audio worked (and was always used) when recording audio in non-wave mode.
- Picasso IV in Z3 mode didn't appear in Z3 autoconfig space.
- Initialize VGA chip emulation earlier, fixes emulator crash when Piccolo board is configured. (Also for some reason Piccolo and Piccolo SD boards are not used by OS4)
- Too large Z2 RTG VRAM value in config file was accepted as valid.
- Show user friendly message if PPC CPU is started without PPC plugin.
- Disassembler decoded FMOVE.x FPy,<ea> incorrectly, FPy was wrong.
- "Untrap = middle button" + "Minimize when focus is lost" + full-window mode didn't minimize. Only windowed mode should require real lost focus to become minimized.
- GUI appeared under full-window background window.
- Use secondary fast RAM bank for A2620/A2630 accelerator memory, works better with other Z2 boards (like A2091)
- Allow hardware unsupported (total >8M) Z2 total board size. Can happen in real world so it should be available in emulation too.
- Added Z2 autoconfig address validation, log and ignore any autoconfig attempt outside of valid Z2 regions.
- Added 68030 + more compatible CPU core. Previously this combination was unusable.


« Ultima modifica: 08 Dicembre 2014, 22:00:04 da Carlo »

Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #20 il: 08 Dicembre 2014, 22:00:22 »
WinUAE 29.2 Beta 25

- Added 1M/0.5M+0.5M chip/slow ram option checkbox to Advanced Chipset (for example in rev6 A500 it is JP2 solder pad). If hardware is configured for 1M chip without 512k slow ram, normal chip ram alias at upper 512k of chip ram address space gets replaced with "bus noise". Can be only changed when chip RAM size is less than 1M. (ECS Agnus + 512k chipram without slow ram configuration always used this option previously, now it is optional and not enabled by default)
- Map Chip RAM mirror at 0x01000000 in A2620/A2630 config, to prevent A26x0 built-in monitor program detecting huge ram expansion at 0x01000000.
- uaenet.device + slirp combination was broken (probably has always been).
- uaegfx modeid space increased, reduces modeid conflicts if host os has huge amount of modes.
- Debugger does not anymore exit stopped CPU state (STOP instruction) after exiting debugger.
- "SCSI (Auto)" priorities changed: mainboard built-in first, then accelerator board, expansions last. (Expansions was first previously)
- More accurate 68000 prefetch mode instruction cycle usage, added non-static cycle counting (mul, div etc..)

Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #21 il: 08 Dicembre 2014, 22:01:09 »
Nuovo aggiornamento ...  OplÓ sobbalzo alla nuova versione 3.0 Pubblica Beta 26 (RC1) !!!

WinUAE 3.0 Pubblica Beta 26 RC1


Beta 26: RC1, Official release date deadline is mid december. This is far too too long beta series..

- Bumped version to 3.0.
- Directory filesystem statefile support didn't save open file's full path correctly if path was deeper than 2 levels from root. (Bug since directory statefile support was implemented)
- Z3 mapping mode = automatic: select always real mode if JIT is disabled.
- Added picassoiv_rom_file config file entry, if you want to use different versions or custom path.
- Off by one error in internal buffer calculation, display was shifted by 1 vertical pixel, hiding first line if window size was small enough but still big enough to fit all vertical lines.
- 68000 JMP (d8,An/PC,Xn) didn't include extra 4 cycle idle time. (Documentation says 3 read cycles which is incorrect, correct sequence is 4 idle cycles + 2 idle cycles + prefetch + prefetch)

QEMU PPC emulator dll has been updated to 2.2.0rc3 QEMU revision: http://www.winuae.net/files/b/qemu-uae.zip (old one is still also compatible)

Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re: BiNGo: OS 4.1 su WinUAE PPC
« Risposta #22 il: 08 Dicembre 2014, 22:01:28 »
Nuovo aggiornamento ... ecco la nuova versione 3.0 Pubblica Beta 27 (RC2) !!!


WinUAE 3.0 Pubblica Beta 27 RC2


- Added compatibility warning message if PPC CPU (and m68k is stopped) configures UAE filesystem autoconfig board ("UAE" controller that is needed by uaehf.device bsdsocket, uaescsi and so on)
- Added download url to no ppc plugin detected message.
- Minimize when inactive option should be ignored if mode is fullscreen. Only uncapturing mouse in real fullscreen mode makes no sense. (b24)
- 68000 MOVE to CCR/SR idle cycle count is 4 cycles, not 6.
- 68000 prefetch mode ("more compatible") DBcc cycle counting fixed.
- 68030 prefetch/"cycle-exact" mode MMU instruction exception prefetch fix. (Same as 280b1 for FPU)
- 68030 "fake" MMU (MMU emulation not enabled = MMU instructions do nothing), absolute address (xxx.w and xxx.l) addressing modes were marked incorrectly as invalid.
- Strange immediate TST variant (TST.x #z) is valid instruction if 68020+.
- Allow 24-bit address space with 68030 CPU. (Not going to touch other CPUs just yet)


Un mio Video Tutuorial che mostra come installare AMiGA OS4.0 Classic su WinUAE PPC
« Ultima modifica: 08 Dicembre 2014, 22:03:17 da Carlo »

Offline Carlo

  • Moderatore globale
  • Utente storico
  • *****
  • Post: 3078
  • > BRINDISI <
    • Mostra profilo
    • www.plagimusicali.net
    • E-mail
Re:BiNGo: OS 4.1 su WinUAE PPC
« Risposta #23 il: 22 Giugno 2015, 00:35:38 »
Dopo la versione Stable di WinUAE 3.1.0, la prossima in uscita vedrÓ ancora dei notevoli miglioramenti come l'emulazione della la PCI Bridge, intanto allego le novitÓ dell'ultima beta rilasciata: WinUAE 3.1.0 Beta 23 RC3 (03 Giugno 2015); QUI Ŕ possibile leggere tutte le novitÓ introdotte nelle 22 beta precedenti di questa release.

- Toccata audio didn't automatically re-enable audio if it was stopped by automatic switching.
- Fixed A2065 crash in "Cable disconnected" mode.
- Added J.Kommos ROM v1.7 (1990-03-13) Previously added ROM was v1.8 (1990-07-25).
- Preferred Technologies Nexus added to ROM scan result window.
- Fixed 68030 MMU prefetch hack flaw that caused A3000 with 2.04 SuperKickstart to crash.
- "Mouse uncaptured: emulation paused" and any key pressed: key was not released automatically (ALT-TAB).
- 68881/68882 NULL FSAVE frame has normal frame size stored (Undocumented but real hardware confirmed)
- Don't prevent RTC in A1200 chipset extra mode if accelerator board is also enabled.
- HD selection GUI visual bugs fixed.
- Added input device autoswitch on/off checkbox. (This was supposed to be added long time ago but I forgot)

Per chi dovesse interessare ecco due miei video che mostrano come installare e configurare in OS4.1 (emulato) una Rete LAN o Wireless (la scheda di rete del PC sarÓ una sorta di Router)


Installazione AMiGA OS4.0 Classic su WinUAE PPC

WinUAE Amiga OS4.1: Configurazione Rete LAN e Rete Wireless
« Ultima modifica: 22 Giugno 2015, 00:36:32 da Carlo »